Dracaena – plant labels from the Viridothek
https://viridothek.info/en/houseplants/dracaena/

STL: a single part, you switch colour at a height of 2.4 mm.
3MF: plate and lettering as two parts, each with its own filament.
SVG: for the laser – cut the red line, engrave the black areas, lightly score the blue lines.
Notes on printing and engraving: https://viridothek.info/en/print-and-engrave/

Licence: CC BY-NC-SA 4.0 – https://creativecommons.org/licenses/by-nc-sa/4.0/
Attribution: “Viridothek”, https://viridothek.info/
Font: Source Sans 3 (SIL Open Font License).

Researched and written with AI, every statement with a source – not checked for accuracy by a person. Mistakes are possible.

As of: 21 October 2026